Owners Manual

Table 2. Navigation keys
Keys Navigation
Up arrow Moves to the previous field.
Down arrow Moves to the next field.
Enter Allows you to select a value in the selected field (if applicable) or follow the link in the field.
Spacebar Expands or collapses a drop‐down list, if applicable.
Tab Moves to the next focus area.
NOTE: For the standard graphics browser only.
Esc Moves to the previous page till you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.
F1 Displays the System Setup help file.
System Setup options
NOTE:
Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 3. General
Option Description
System Information This section lists the primary hardware features of your computer.
• System Information
• Memory Configuration
• PCI Information
• Processor Information
• Device Information
Boot Sequence Allows you to change the order in which the computer attempts to find an operating system.
• Diskette Drive
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
• Internal HDD
Boot List Options Allows you to change the boot list option.
• Legacy
• UEFI
Advanced Boot Options Allows you to Enable Legacy Option ROMs
• Enable Legacy Option ROMs (Default: not enabled)
Date/Time Allows you to set the date and time. The changes to the system date and time takes effect
immediately.
Table 4. System configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Enable UEFI Network Stack
• Disabled
NOTE: You can use the Disabled option, only if Active Management Technology
(AMT) option is disabled.
• Enabled
• Enabled w/PXE (Default)
24 System Setup