Owners Manual

Installing the power button

1. Slide the power switch module into the slot on the chassis until it clicks into place.

2. Connect the power switch cable to the connector on the system board.

3. Install the:

a) optical drive

b) hard drive

c) front bezel

d) cover

4. Follow the procedure in After Working Inside Your Computer.

Removing the Input/Output (I/O) panel

1. Follow the procedure in Before Working Inside Your Computer.

2. Remove the:

a) cover

b) front bezel

3. To remove the I/O panel:

a) Remove the screw that secures the I/O panel to the chassis [1].

b) Slide the I/O panel to the right and remove it from the computer [2].

Removing and installing components