Owners Manual

ManualsBrandsDell ManualsComputersPrecision T5610

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Topics:

• Recommended Tools

• System Overview

• Removing the Power Supply Unit (PSU)

• Installing the Power Supply Unit (PSU)

• Removing the Cover

• Installing the Cover

• Removing the Front Bezel

• Installing the Front Bezel

• Removing the PCI Card

• Installing the PCI Card

• Removing the Optical Drive

• Installing the Optical Drive

• Removing the Hard Drive

• Installing the Hard Drive

• Removing the Thermal Sensor

• Installing the Thermal Sensor

• Removing the Input/Output (I/O) Panel

• Installing the Input/Output (I/O) Panel

• Removing the Air Tunnel

• Installing the Air Tunnel

• Removing the Memory

• Installing the Memory

• Removing the Coin-Cell Battery

• Installing the Coin-Cell Battery

• Removing the Heatsink

• Installing the Heatsink

• Removing the Heatsink Fan

• Installing the Heatsink Fan

• Removing the Processor

• Installing the Processor

• Removing the System Fan

• Installing the System Fan

• Removing the PSU Card

• Installing the PSU Card

• Removing the Speaker

• Installing the Speaker

• Removing the System Board

• Installing the System Board

• System Board Components

Recommended Tools

The procedures in this document may require the following tools:

• Small flat-blade screwdriver

• Phillips screwdriver

• Small plastic scribe

8 Removing and Installing Components