Owners Manual

Table 1. Navigation Keys (continued)
Keys Navigation
<Esc> Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.
<F1> Displays the System Setup help file.
System Setup Options
NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 2. General
Option Description
System Board This section lists the primary hardware features of your computer.
• System Information
• Memory Configuration
• PCI Information
• Processor Information
• Device Information
Boot Sequence Allows you to change the order in which the computer attempts to find an operating system.
• Diskette Drive
• Internal HDD
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
• SATA
Boot List Option Allows you to change the boot list option.
• Legacy
• UEFI
Advanced Boot Options Allows you to Enable Legacy Option ROMs
• Disabled
• Enabled (Default)
Date/Time Allows you to set the date and time. The changes to the system date and time takes effect immediately.
Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Disabled
NOTE: You can use the Disabled option, only if Active Management Technology (AMT)
option is disabled.
• Enable UEFI Network Stack
• Enabled (Default)
• Enabled w/PXE
Integrated NIC 2 Allows you to control on-board LAN controller. The options are:
• Enable (Default)
• Enable w/PXE
NOTE: This feature is supported only on T7610
38 System Setup