Owners Manual

Installing the Cover

1. Place the computer cover on the chassis.

2. Press down on the computer cover until it clicks into place.

3. Follow the procedures in After Working Inside Your Computer.

Removing the Front Bezel

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the cover.

3. Gently pry the front bezel retention clips away from the chassis located at the edge of front bezel.

4. Rotate and pull the bezel panel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.

Installing the Front Bezel

1. Insert the hooks along the bottom edge of the front panel into the slots on the chassis front.

2. Rotate the bezel towards the computer to engage the front-bezel retention clips until they click into place.

3. Install the cover.

4. Follow the procedures in After Working Inside Your Computer.

Removing the PCI Card

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the left cover.

3. Perform the following steps as shown in the illustration:

a. Open the plastic latch fastening the PCI card in its slot [1].

b. Press down the latch and pull the PCI card away from the computer [2, 3].

Removing and Installing Components