Mobile Workstation User's Guide

Adding and Replacing Parts 217
23 Remove the system board, slowly easing the connectors out of their access
holes on the back and side of the computer base:
a With the back of the computer facing you, grasp the upper-right
corner of the system board and lift it slightly.
b Pull the system board assembly away from you toward the front of the
computer and slightly to the right; at the same time, use your left
hand to release the audio connectors by pulling the side of the
computer base slightly to the left.
1 system board M2.5 x 5-mm screws (4)
1
book.book Page 217 Wednesday, August 13, 2008 12:12 PM