Quick Start Manual

Track and Analyze

Enable/Disable Smart Tracking

When enabled, Smart Tracking collects system configuration information as well as sub-system usage data in the

background. Smart Tracking reports contain data such as Fan speed, Thermal data, Battery usage, Processor Utilization

etc. over a period of time. These reports can help you understand the behavior of your specific system under the

operating environment that was present when the report was running.

You can configure the following options that control the operation of Smart Tracking:

Table 7. Options to control Smart Tracking

Options Description

Report Frequency This setting controls how often reports are generated. Daily reports are generated

whenever the system date changes which may be a period less than 24 hours. The report

frequency period does not include the time your system spends in Sleep/Hibernate/

Shutdown states.

Stop Tracking After This setting controls how many reports are generated before Smart Tracking gets disabled

automatically. E.g. If you configure the system with a Report Frequency of 10 hours and

Stop Tracking after 3 Report(s), then you should expect to see your first report after 10

hours. Two new reports should be seen every 10 hours after the first one. Smart Tracking

should stop after three reports are generated.