Administrator Guide

ManualsBrandsDell ManualsAnalyticsPrecision Optimizer

[Description("Load unload cycle count (normalized value).")]

uint8 Load_Unload_Cycle_Count_Normalized;

[Description("Load unload cycle count (worst value).")]

uint8 Load_Unload_Cycle_Count_Worst;

[Description("Load unload cycle count (threshold value).")]

uint8 Load_Unload_Cycle_Count_Threshold;

[Description("Total power on hours.")]

sint64 Power_On_Hours;

[Description("Total power on hours (normalized value).")]

uint8 Power_On_Hours_Normalized;

[Description("Total power on hours (worst value).")]

uint8 Power_On_Hours_Worst;

[Description("Total power on hours (threshold value).")]

uint8 Power_On_Hours_Threshold;

[Description("Realloc sector count.")]

sint64 ReAlloc_Sector_Count;

[Description("Realloc sector count (normalized value).")]

uint8 ReAlloc_Sector_Count_Normalized;

[Description("Realloc sector count (worst value).")]

uint8 ReAlloc_Sector_Count_Worst;

[Description("Realloc sector count (threshold value).")]

uint8 ReAlloc_Sector_Count_Threshold;

[Description("Head flying hours.")]

sint64 Head_Flying_Hours;

[Description("Head flying hours (normalized value).")]

uint8 Head_Flying_Hours_Normalized;

[Description("Head flying hours (worst value).")]

uint8 Head_Flying_Hours_Worst;

[Description("Head flying hours (threshold value).")]

uint8 Head_Flying_Hours_Threshold;

[Description("Raw read error rate.")]

sint64 Raw_Read_Error_Rate;

[Description("Raw read error rate (normalized value).")]

uint8 Raw_Read_Error_Rate_Normalized;

[Description("Raw read error rate (worst value).")]

uint8 Raw_Read_Error_Rate_Worst;

[Description("Raw read error rate (threshold value).")]

uint8 Raw_Read_Error_Rate_Threshold;

[Description("Spin up time.")]

sint64 Spin_Up_Time;

[Description("Spin up time (normalized value).")]

uint8 Spin_Up_Time_Normalized;

[Description("Spin up time (worst value).")]

uint8 Spin_Up_Time_Worst;

[Description("Spin up time (threshold value).")]

uint8 Spin_Up_Time_Threshold;

[Description("Free fall count.")]

sint64 Free_Fall_Count;

[Description("Free fall count (normalized value).")]

46 付録 B - WMI クラス定義ファイル