Owners Manual

Installing front input and output panel

1. Insert the input and output(I/O) panel onto its slot in the system.

2. Slide the panel to secure the hooks into the chassis hole.

3. Tighten the screw to secure the front I/O panel to the chassis.

4. Connect the following cables:

● intrusion switch cable

● USB 3.1 cable

● front I/O power cable

● USB 3.1 cable

● speaker cable

● audio cable

5. Install the:

a. front input and output bezel

b. 5.25 inch ODD bracket

c. front bezel

d. side cover

Removing and installing components