Specifications

Table 26. General(continued)
Option Description
Boot Sequence
Allows you to change the order in which the computer attempts to
find an operating system.
The options are:
• Windows Boot Manager
• Boot List Option-UEFI is the enabled by default.
UEFI Boot Path Security
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
• Always, Except Internal HDD—Default
• Always
• Never
Date/Time
Allows you to set the date and time. The change to the system
date and time takes effect immediately.
System configuration
Table 27. System Configuration
Option Description
Integrated NIC
Allows you to configure the integrated network controller.
Click one of the following options:
• Disabled
• Enabled
• Enabled w/PXE—Default
SATA Operation
Allows you to configure the operating mode of the integrated
SATA hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is configured to support RAID mode.
Drives
Allows you to enable or disable various drives on board.
The options are:
• SATA-0
• SATA-1
• SATA–4
• M.2 PCIe SSD-0
• M.2 PCIe SSD-1
All the options are set by default.
SMART Reporting
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
• Enable SMART Reporting
24 System setup