Setup Guide

5 Install the hard drive interposer board:
a Align the hard drive interposer board holder into its position on the system [1].
b Fasten the 3 (M2.0x3.0) screws to secure the hard drive interposer board holder to the system [2].
c Place the hard drive interposer board into its position on the hard drive interposer board holder [3].
d Fasten the single (M2.0x3.0) and the single (M2.0x5.0) screw to secure the hard drive interposer board to the hard drive
interposer board holder [4].
10
Hard drive assembly