Service Manual

g WWAN card

h WLAN card

i palmrest

j display assembly

k display bezel

3 To remove screws from the display panel :

a Remove the 4 (M2.0X3.0) screws that secure the display panel to the display assembly [1].

b Lift the display panel and turn the display panel over to access the eDP cable [2].

4 To remove display panel:

a Peel the adhesive tape to access the eDP cable [1].

b Peel the adhesive tapes that secures the eDP cable [2].

c Lift the metal tab and disconnect the eDP cable from the connector on the display panel [3, 4].

Removing and installing components