Service Manual

d keyboard

e hard drive

f base cover

g WWAN card

h WLAN card

i palmrest

j display assembly

3 To remove display bezel:

a Using a plastic scribe pry the two recess points at the bottom edge of the display bezel [1].

b Pry around the sides and top edge of the display bezel [2, 3, 4].

NOTE: While prying the display bezel, make sure to pry along the outside edge of the display bezel using

your hands-using a screw driver or other sharp objects may damage the display cover.

NOTE: The display bezel shipped with a non-touch display is a disposable part and should be replaced with a new

display bezel anytime it is removed from the system.

Installing the display bezel

1 To install the display bezel:

a Place the display bezel on the display assembly.

b Press the edges of the display bezel until it clicks onto the display assembly [1, 2, 3, 4].

Removing and installing components