Service Manual

a SD card

b battery cover

c battery

d keyboard

e hard drive

f base cover

g WWAN card

h WLAN card

i palmrest

3 To remove display assembly:

a Remove the 2 (M2.5x5.0) screws at the bottom of the system that secures the display assembly in place [1].

b Unroute all the wireless antenna cables from the routing channels at the bottom of the system and next to the hinge caps [2]

and unthread the antenna cables.

c Remove the 2 (M2.5x6.0) screws at the rear of the system that secures the display assembly in place.

Removing and installing components