Service Manual

d hard drive

e hard drive interposer board

f keyboard

g base cover

h primary memory

i secondary memory

j WLAN card

k WWAN card

l M.2 SSD card

m SIM card

n palmrest

o heat sink assembly

p graphic card

3 To disconnect the system board:

a Disconnect the power connector cable and battery cable from the connectors on the system board [1, 2].

b Remove the 3 (M2.0x5.0) screws that secure the Type-C USB bracket to the system [1].

c Remove the Type-C USB bracket from the system [2].

d Disconnect the touchpad cable [3], speaker cable [4] and LED board cable [5] from the connectors on the system board.

Removing and installing components