Service Manual

3 To remove LED board:

a Lift the tab and disconnect the LED-board cable from the system board [1].

b Peel the LED-board cable from the system.

c Remove the single (M2.0x3.0) screw that secures the LED board to the system [2].

d Remove the LED board from the system [3].

Installing the LED board

1 To install the LED board:

a Align the LED board to its original position on the system [1].

b Replace the single (M2.0x3.0) screw to secure the LED board to the system [2].

c Ax the LED-board cable.

d Connect the LED-board cable to the connector in the system board [3].

Removing and installing components