Service Manual

3 Install the:
a base cover
NOTE: Installing of base cover is required only if the M.2 SSD module in slot 3, 5 or 6 are accessed.
b battery
c battery cover
d SD card
4 Follow the procedure in After working inside your computer.
Coin-cell battery
Removing the coin cell battery
1 Follow the procedures in Before working inside your computer.
2 Remove the:
a SD card
b battery cover
c battery
d base cover
3 To remove coin cell battery:
a Disconnect the coin cell battery cable from the system [1].
b Pry and lift the coin cell battery from the system [2].
CAUTION
: Disconnecting coin cell battery may reset BIOS settings, time and date within System Settings,
cause BitLocker or other security resets.
50 Removing and installing components