Service Manual

3 Install the:

a battery cover

b SD card

4 Follow the procedure in After working inside your computer.

Hard drive

Removing the hard drive assembly

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a SD card

b battery cover

3 To remove hard drive assembly:

a Slide the hard drive release latch into the unlock position [1].

b Remove the 4 (M2.5x3.0) screws that secure the hard drive assembly to the system [2].

c Flip up the tab at the end of the hard drive assembly [3].

d Lift the hard drive assembly from the system [4].

Removing and installing components