Service Manual

f base cover
g WWAN card
h WLAN card
i palmrest
j display assembly
k display bezel
l display panel
m display hinge
3 To remove display bracket:
a Peel the adhesive tape that covers the display support bracket [1].
b Remove the 6 (M2.0x3.0) screws that secure the display support brackets to the display cover [2].
c Remove the display support brackets from the display cover [3].
Installing the display support bracket
1 To install the display support bracket:
a Place the display brackets onto its slot on the display cover [1].
b Replace the 6 (M2.0x3.0) screws to secure the display bracket to the display cover [2].
c Ax the adhesive tape to cover the display support bracket [3].
102
Removing and installing components