Service Manual

f base cover
g WWAN card
h WLAN card
i palmrest
j display assembly
k display bezel
l display panel
3 To remove eDP cable:
a Peel the adhesive tape covering the camera module [1].
b Disconnect the eDP cable from the camera module [2].
c Peel the eDP cable from the display cover and unroute the cable from the routing channels [3].
d Remove the eDP cable from the system.
Installing the eDP cable
1 To install eDP cable:
a Route and ax the eDP cable on the display cover [1].
b Connect the eDP cable to the connector on the camera module [2].
c Ax the adhesive tape covering the camera module [3].
100
Removing and installing components