Specifications

Option Description
Unobtrusive Mode Allows you to turn o all light and sound emissions in the system
when you press Fn+F7. This option is disabled by default.
Miscellaneous devices
Allows you to enable or disable various on board devices.
• Enable Camera—Default
• Enable Hard Drive Free Fall Protection—Default
• Enable Secure Digital (SD) Card—Default
• Secure Digital (SD) Card Boot
• Secure Digital Card (SD) Read-Only Mode
Video screen options
Table 27. Video
Option Description
LCD Brightness
Allows you to set the display brightness depending upon the power
source. On Battery(50% is default) and On AC (100 % default).
Security
Table 28. Security
Option Description
Admin Password
Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
• Enter the old password:
• Enter the new password:
• Conrm new password:
Click OK once you set the password.
NOTE: For the rst time login, "Enter the old password:" eld is marked to "Not set". Hence,
password has to be set for the rst time you login and then you can change or delete the
password.
System Password
Allows you to set, change, or delete the System password.
The entries to set password are:
• Enter the old password:
• Enter the new password:
• Conrm new password:
Click OK once you set the password.
NOTE: For the rst time login, "Enter the old password:" eld is marked to "Not set". Hence,
password has to be set for the rst time you login and then you can change or delete the
password.
Strong Password
Allows you to enforce the option to always set strong password.
• Enable Strong Password
System setup 27