Owners Manual

Steps

1. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.

2. Replace the three screws (M2x4) that secure the I/O board to the palm-rest and keyboard assembly.

3. Connect the I/O-board cable to the connectors on the system board and the I/O board.

Next steps

1. Install the battery.

2. Install the base cover.

3. Follow the procedure in After working inside your computer.

Display assembly

Removing the display assembly

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

About this task

The following images indicate the location of the display cable and the display hinges and provide a visual representation of the removal

procedure.

Disassembly and reassembly