Owners Manual

Steps

1. Connect the right fan (Fan 1) cable to the system board.

2. Align the screw holes on the fan 1 with the screw holes on the system board and palm-rest and keyboard assembly.

3. Replace the two screws (M2x4) and the single screw (M1.6x4) that secure the right fan (Fan 1) to the system board and palm-rest

and keyboard assembly.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Removing the fan 2

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

About this task

The following image indicates the location of the fan 2 and provides a visual representation of the removal procedure.

Disassembly and reassembly