Owners Manual

Table 31. System setup options—Integrated Devices menu )continued(
Integrated Devices
USB ConfigurationEnables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
By default, Enable USB Boot Support is selected.
By default, Enable External USB Ports is selected.
Miscellaneous Devices
Enable Fingerprint Reader DeviceEnables or disables the Fingerprint Reader Device.
By default, Enable Fingerprint Reader Device is selected.
Enable Fingerprint Reader Single Sign OnEnables or disables the Fingerprint Reader Single Sign On capability.
By default, Enable Fingerprint Reader Single Sign On is selected.
Table 32. System setup options—Storage menu
Storage
SATA OperationConfigures operating mode of the integrated SATA hard drive controller.
Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology.(
Storage Interface
Port EnablementEnables the selected onboard drives.
●SATA-4
Default: ON
●M.2 PCIe SSD-0
Default: ON
●M.2 PCIe SSD-1
Default: ON
Drive InformationDisplays the information of various onboard drives.
Enable SMART ReportingEnables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART.(
Default: OFF
Enable MediaCardEnables to switch all media cards On/Off or set the media card to read-only state.
By default, Enable Secure Digital (SD) Card is selected.
Table 33. System setup options—Display menu
Display
Display Brightness
Brightness on battery powerSets the screen brightness when the computer is running on battery power.
Default: 50
Brightness on AC powerSets the screen brightness when the computer is running on AC power.
Default: 0
Touch ScreenEnables or disables the touch screen for the OS.
NOTE: The touch screen will always work in the BIOS setup irrespective of this
setting.
Full Screen LogoEnabled or disabled the computer to display full screen logo if the image match
screen resolution.
 27