Owners Manual
Table Of Contents
- Precision 5720 All-in-One Owner’s Manual
- Working on your computer
- Removing and installing components
- USB dongle-bay cover
- Back cover
- Memory module
- Hard drive
- System board shield
- M.2 PCIe SSD
- Memory fan
- Heat sink
- Processor
- Coin cell battery
- WLAN card
- Stand
- System fan
- Power supply unit
- Inner frame
- Built-in self test button
- Microphone
- I/O panel
- USB-dongle port
- Diagnostic light and button board
- Drive cage
- Converter board
- Speaker
- Power button board
- Media card reader
- Camera
- System board
- Display assembly
- Middle frame
- Speaker bezel
- Display panel
- Technology and components
- System setup
- Software
- Troubleshooting
- Technical specifications
- System specifications
- Memory specifications
- Video specifications
- Audio specifications
- Communication specifications
- Connectors
- Display specifications
- Storage specifications
- Port and connector specifications
- Power specifications
- Camera specifications
- Stand specifications
- Physical specifications
- Environmental specifications
- Contacting Dell
Installing system board
1 Align the screw holes on the system board with the screw holes on the middle frame.
2 Replace the 12 screws (M3X4) that secure the system board to the middle frame.
3 Replace the screw (M3X4) that secures the media card reader and audio cables to the system board.
4 Connect the microphone cable , audio cable, media-card reader cable and converter-board cable to their respective connectors on the
system board.
5 Connect the media-card reader cable, webcam cable and display cable to their respective connectors on the system board.
6 Install the:
a solid-state drive.
b wireless card
c memory fan
d coin-cell battery
e processor.
f processor heat-sink
g I/O panel
h system-board shield.
i inner frame
j system fan
k stand
Removing and installing components
59