Owners Manual

c system-board shield
3 In sequential order (indicated on the heat sink), loosen the captive screws that secure the processor heat-sink to the system board.
4 Remove the screw (M3X4) that secures the processor heat-sink fan to the middle frame.
5 Lift the processor heat-sink o the system board.
Installing processor heatsink
1 Align the captive screws on the processor heat-sink with the screw holes on the system board.
2 In sequential order (indicated on the processor heat-sink), tighten the captive screws that secure the processor heat-sink to the
system board.
3 Replace the screw (M3X4) that secures the processor heat-sink fan to the middle frame.
4 Install the:
a system-board shield
b back cover
c USB dongle-bay cover
5 Follow the procedure in After working inside your computer
Processor
Removing processor
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a USB dongle-bay cover
b back cover
c system-board shield
d processor heatsink
3 Press the release-lever down and then pull it outwards to release it from the securing tab [1].
4 Extend the release-lever completely to open the processor cover [2].
5 Gently lift the processor and remove it from the processor socket [3].
Removing and installing components
23