Owners Manual

3. Close the display.

4. Connect the antenna cables to the I/O board [1].

5. Align the screw holes on the wireless-antenna bracket with the screw holes on the I/O board and replace the two screws (M2x4) that

secure the bracket to the I/O board [2].

6. Connect the display cable to the system board and close the latch [3].

7. Align the screw holes on the display-cable bracket with the screw holes on the system board and replace the two screws (M1.6x1.8)

that secure the bracket to the system board [4].

8. Affix the tape that secures the display-cable bracket to the system board [5].

9. Affix the camera cable to the palm-rest and keyboard assembly [6].

10. Connect the camera cable to the system board and close the latch [7].

Removing and installing components