Owners Manual

3. Connect the antenna cables to the I/O board [1].

4. Place the wireless-antenna bracket on the I/O board and replace the two screws (M2x4) that secure the wireless-antenna bracket to

the I/O board [2].

5. Place the Type-C USB bracket on the I/O board and replace the three screws (M2x4) that secure the Type-C USB bracket to the I/O

board [3].

6. Connect the speaker cable to the I/O board [4].

7. Connect the LED and microphone cable to the I/O board [5].

Removing and installing components