Owners Manual

4. Affix the thermal pad on the solid-state drive.

5. Install the base cover.

6. Follow the procedure in After working inside your computer.

I/O-board interposers

Removing the IO board interposer

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

3. To remove the IO board interposer:

a) Remove the four screws (M1.6x5.5) that secure the I/O-board cable to the system board [1].

b) Peel and remove the I/O-board cable from the fans [2].

Removing and installing components