Owners Manual

b) Remove the screw (M2x3) that secures the solid-state drive to the system board [1].

c) Lift the solid-state drive at an angle, then slide and remove the solid-state drive from the solid-state drive slot [2].

Installing the solid-state drive

1. Align the notch on the solid-state drive with the tab on the solid-state drive slot [1].

2. At an angle, slide the solid-state drive into the solid-state drive slot [2].

3. Replace the screw (M2x3) that secures the solid-state drive to the system board [3].

Removing and installing components