Owners Manual
Table Of Contents
- Dell Precision 5530 2-in-1 Setup and specifications guide
- Contents
- Set up your computer
- Create a USB recovery drive for Windows
- Chassis
- Keyboard shortcuts
- System specifications
- System setup
- Software
- Replacement media options
- Operating system
- Downloading the audio driver
- Downloading the graphics driver
- Downloading the USB 3.0 driver
- Downloading the Wi-Fi driver
- Downloading the media-card reader driver
- Downloading the fingerprint reader driver
- Downloading the chipset driver
- Downloading the network driver
- Device drivers
- Getting help
Manageability
Option Description
MEBX Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
● Enable MEBx hotkey—enabled by default
Virtualization support
Option Description
Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware
capabilities provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Trusted
Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and the Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
Wireless
Option
Description
Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
● WLAN
● Bluetooth
All the options are enabled by default.
NOTE: For WLAN enable or disable controls are tied together and they cannot be enabled or disabled
independently.
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
● WLAN
● Bluetooth
All the options are enabled by default.
Maintenance screen
Option
Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is
enabled by default.
Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following is list of devices affected:
● Internal SATA HDD/SSD
30 System setup