Owners Manual

Table 30. Performance (continued)
Option Description
● C states
This option is set by default.
Intel TurboBoost
Allows you to enable or disable the Intel TurboBoost mode of
the processor.
● Enable Intel TurboBoost
This option is set by default.
Hyper-Thread Control
Allows you to enable or disable the HyperThreading in the
processor.
● Disabled
● Enabled—Default
Power management
Option
Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Enable Intel
Speed Shift
Technology
● Enable Intel Speed Shift Technology
Default setting: Enabled
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
● Enable USB Wake Support
● Wake on Dell USB-C dock-enabled
Wireless Radio
Control
Allows the system to sense the connection to a wired network and subsequently disable the selected
wireless radios (WLAN and/or WWAN).
● Control WLAN radio
Default setting: This option is disabled.
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
● Disabled
● WLAN
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
28 System setup