Owners Manual
Table Of Contents
- Dell Precision 5530 2-in-1 Setup and specifications guide
- Contents
- Set up your computer
- Create a USB recovery drive for Windows
- Chassis
- Keyboard shortcuts
- System specifications
- System setup
- Software
- Replacement media options
- Operating system
- Downloading the audio driver
- Downloading the graphics driver
- Downloading the USB 3.0 driver
- Downloading the Wi-Fi driver
- Downloading the media-card reader driver
- Downloading the fingerprint reader driver
- Downloading the chipset driver
- Downloading the network driver
- Device drivers
- Getting help
System setup options
NOTE: Depending on the tabletcomputerlaptop and its installed devices, the items listed in this section may or may not
appear.
General options
Table 25. General
Option Description
System Information Displays the following information:
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Ownership Date, Manufacture Date, and the Express Service Code.
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed,
Memory Channel Mode, and Memory Technology.
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current
Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache,
Processor L3 Cache, HT Capable, and 64-Bit Technology.
● Device Information: Displays M.2 SATA, M.2 PCIe SSD-0, Passthrough MAC
Address, Video Controller, Video BIOS Version, Video Memory, Panel type, Native
Resolution, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Battery Information Displays the battery status health and whether the AC adapter is installed.
Boot Sequence Allows you to specify the order in which the computer attempts to find an operating system
from the devices specified in this list.
Advanced Boot Options Allows you to select the Legacy Option ROMs option, when in UEFI boot mode. By default,
no option is selected.
● Enable Legacy Option ROMs
● Enable Attempt Legacy Boot
● Enable UEFI Network Stack
UEFI Boot Path Security This option controls whether or not the system will prompt the user to enter the Admin
password when booting a UEFI boot path from the F12 Boot Menu.
● Always, Except Internal HDD—Default
● Always
● Never
Date/Time Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.
.
System information
Table 26. System Configuration
Option Description
SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
● Disabled = The SATA controllers are hidden
● AHCI = SATA is configured for AHCI mode
● RAID ON = SATA is configured to support RAID mode (selected by default)
Drives Allows you to enable or disable the various drives on-board:
● SATA-0 (enabled by default)
● M.2 PCIe SSD-0 (enabled by default)
System setup 23