Owners Manual

b) antenna cover

c) display assembly

d) wireless card

e) battery

f) base cover

5. Follow the procedures in After Working Inside Your Computer.

Removing the palm-rest assembly

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the:

a) base cover

b) battery

c) memory modules

d) Follow the procedure from step 1 to step 4 in “Removing the hard drive

e) wireless card

f) speakers

g) heat-sink

h) fans

i) display assembly

j) power-adapter port

k) system board

l) keyboard

After performing the steps in the prerequisites we are left with the palm-rest assembly.

a. palm-rest assembly

Installing the palm-rest assembly

1. Place the palm-rest assembly on a clean and flat surface.

2. Install the:

a) keyboard

b) system board

c) power-adapter port

d) display assembly

e) fans

f) heat-sink assembly

g) speakers

h) wireless card

i) Follow the procedure from step 3 to step 6 in “Replacing the hard drive”.

Ta bort och installera komponenter