Users Guide

C-4
Dell Precision 410 Mini Tower Systems User’s Guide
The loaded card is not
a category card. Press
OK to proceed.
The category you have
chosen is not the correct
category under which to
add this card.
Select OK. The ICU automatically opens
the correct category’s dialog box.
Continue the procedure for adding the
card as described in “Adding a Listed
Card” or “Adding an Unlisted Card” in
Chapter 4.
No more DMA values can
be added.
No more interrupt
values can be added.
No more memory values
can be added.
No more I/O port values
can be added.
No more values are avail-
able for the resource you
are trying to add or modify.
The maximum number of values for
each resource is as follows:
 4 DMA channels
 7 IRQ lines
 9 memory address blocks
 20 I/O ports
To free values for the resource you are
trying to add or modify, delete some of
the values listed in the resource box for
the card. If your card requires all of the
values listed, contact your card manu-
facturer to resolve the issue.
7DEOH & &RQILJXUDWLRQ 8WLOLW\ 0HVVDJHV FRQWLQXHG
0HVVDJH 3UREDEOH &DXVH &RUUHFWLYH $FWLRQ
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
23205BK0.BK : 23205AC0.FM Page 4 Wednesday, March 18, 1998 1:51 PM
Downloaded from www.Manualslib.com manuals search engine