Owners Manual

Option Description
PCIe Zone Allows you to control the minimum and maximum fan speed in the PCIe Zone. The range of
characters is between 0 and 100.
NOTE: When Thermal Mode is set in auto, Zero is the optimal speed level.
Post behavior
Table 27. POST Behavior
Option Description
Numlock LED Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting when the computer starts. The option
EnableKeyboard Error Detection is enabled by default.
Extend BIOS POST Time This option creates an additional preboot delay.
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full Screen Logo This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the options:
• Prompt on Warnings and Errors—Default
• Continue on Warnings
• Continue on Warnings and Errors
Manageability
Table 28. Manageability
Option Description
USB provision This option is not selected by default.
MEBx Hotkey This option is selected by default.
Virtualization support
Table 29. Virtualization Support
Option Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities that are provided by the Intel Virtualization technology.
• Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities that are provided by the Intel Virtualization technology for direct I/O.
• Enable VT for Direct I/O
This option is set by default.
System setup 29