Setup Guide

Installing the Dell turing card

1. Follow the procedure in Before working inside your computer.

NOTE: The system will not power on if the top cover is removed. If the top cover is removed while the system is

powered on, the system sounds an alarm for 4 seconds and shuts down.

2. To remove the cover:

a) Using a Phillips screw driver, rotate the lock to unlock position to release the latch [1].

b) Pull the latch back to release the top cover [2].

c) Lift the top cover away [3] from the system.

Un-route the graphics card power cable from retention clips on the graphics card fan cage.

8 Installing the Dell turing card