Owners Manual

4. Install the:

a) Riser 1 module

b) Top cover

5. Follow the procedure in After working inside your computer.

Removing riser 2 module

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) Top cover

3. To remove the riser 2 module:

a) Locate the blue points on the riser 2 module. Grab the blue points, and lift the riser 2 module away from the system chassis.

Installing the Riser 2 Module

1. Hold the blue points on the riser 2 module, and align it with the guide pins to install.

2. Press down the riser 2 module and ensure that it is seated in the PCIe slot.

Removing and installing components