Owners Manual

2. Remove the:
a) Top cover
b) Riser 1 module
3. Removing the riser 1 dell ultraspeed drive duo card:
a) Pull the release tab [1], and open the riser 1 slot.
b) Push the release tab on the PCIe slot [2], lift out the Dell Ultraspeed Drive Duo Card from slot [3].
4. To remove the SSD card
a) Press the release latch on the Dell Ultraspeed Drive Duo Card cover [1], remove the one (M3x3.5) screw [2] and take out the SSD
card [3].
NOTE:
If removing the Dell Ultraspeed Drive Duo Card permanently, install Riser1 blank in empty expansion slot 2
opening.
68 Removing and installing components