Owners Manual

Installing the Riser1 Dual Graphics Card

1. Reconnect the graphics card power cable [1], insert the dual graphics card into the PCIe slot [2].

2. Close the release tab to secure the riser1 dual graphics card in place [3].

NOTE: Ensure that the graphics card bracket is installed correctly in the slot.

3. Install the:

a) Riser 1 module

b) Top cover

4. Follow the procedure in After working inside your computer.

Removing the riser 1 dell ultraspeed drive duo card

1. Follow the procedure in Before working inside your computer.

Removing and installing components