Owners Manual

2. Install the:
a) Riser 1 module
b) Top cover
3. Follow the procedure in After working inside your computer.
Removing riser1 Dual Graphics Card
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Top cover
b) Riser 1 module
3. To remove the riser1 Dual graphics card:
a) Pull the release tab [1] to open the riser1 slot.
b) Disconnect the dual graphics card power cable [2].
c) Push the release tab on the PCIe slot [3], lift out the graphics card from the slot [4].
NOTE: If removing the dual graphics card permanently, install two Riser1 blanks in empty expansion slot opening.
66 Removing and installing components