Owners Manual

3. Follow the procedure in After working inside your computer.
Removing riser1 Graphics Card
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Top cover
b) Riser 1 module
3. To remove the riser1 graphics card:
NOTE: If installed, disconnect graphics card power cable from graphics card.
a) Pull the release tab [1] to open the riser1 slot.
b) Push the release tab on the PCIe slot [2], lift out the graphics card from the slot [3].
NOTE: If removing the graphics card permanently, install Riser1 blank in empty expansion slot opening.
Installing the riser1 Graphics Card
1. Insert the riser1 graphics card into the slot [1] and close the release tab to secure the riser1 graphics card in place [2].
NOTE: Ensure that the graphics card bracket is installed correctly in the slot.
Removing and installing components 65