Owners Manual

a) Press the release tabs on the sides of the power distribution board connector and lift the cable away [1].

b) Disconnect the two power supply unit fan connectors [2].

c) Press the release tabs of the power distribution board, power supply connector and disconnect the cable [3].

d) Remove the three (#6.32x6) screws that secure the power distribution board [4].

e) Lift away the power distribution board from the system chassis [5].

Installing power distribution board

1. Align the power distribution board with the slots on the system chassis [1].

2. Replace the three (#6.32x6) screws that secures the power distribution board to the system board [2].

3. Reconnect the power distribution board, power cable [3], power supply unit fan cables [4], and the power distribution board connector

[5].

Removing and installing components