Owners Manual

Installing the front Input Output panel

NOTE:

Ensure the front I/O panel is under the two guide clips (one on left side and another on the right side) or the

panel will not properly rest on the screw standoffs. The front I/O panel can be damaged if not properly installed.

1. Align the front I/O panel with the slots on the system chassis [1].

2. Replace the three (#6-32x5) screws that secures the front I/O panel to the system chassis [2].

3. Reconnect the front panel cable [1], front panel HSD cable [2], and the front panel power cable [3].

Removing and installing components