Owners Manual

Installing the memory module

1. Locate the appropriate memory module connector.

2. Align the edge connector of the memory module with the alignment key of the memory module connector, and insert the memory

module in the connector [1].

NOTE:

Do not apply pressure at the center of the memory module, apply pressure at both ends of the memory

module evenly.

NOTE: The memory module connector has an alignment key that enables you to install the memory module in the

connector in only one orientation.

3. Press the memory module with your thumbs until the retention tabs firmly click into place [2].

4. Repeat step 1 through step 4 of this procedure to install the remaining memory modules.

5. Install the:

a) Top cover

b) Air duct

6. Follow the procedure in After working inside your computer.

Removing and installing components