Owners Manual

5. Install the:

a) Hard drives

b) Air duct

c) Top cover

d) Dust filter

e) Front bezel

6. Follow the procedure in After working inside your computer.

Memory module

Removing memory module

1. Follow the procedure in Before working inside your computer.

NOTE:

Allow the memory modules to cool after you power down the system. Handle the memory module by the card

edges and avoid touching the components or metallic contacts on the memory module.

2. Remove the:

a) Top cover

b) Air duct

3. To remove the memory module:

a) Press open the retention tabs from both sides to lift the memory module from the connector [1].

b) Remove the memory module from the system board [2].

Removing and installing components