Owners Manual

System cover

Removing the system cover

1. Follow the procedure in Before working inside your computer.

NOTE: System will sound an alarm for 4 seconds and shut down if top cover is removed while the system is running.

The system will not power on if the top cover is removed.

2. To remove the cover:

a) Rotate lock on latch with a Phillips screwdriver to release the lock [1].

b) Pull the latch to release the top cover [2].

c) Lift the top cover away [3].

Installing the system cover

1. Lift the release latch and align the top cover tabs with the slots on the system chassis [1] and slide it into the slot.

NOTE: Ensure that all internal cables are routed correctly and connected before securing the top cover.

2. The release latch automatically locks the top cover to the system.

Removing and installing components