Owners Manual

2. Close the psu hinge.
3. Install the cover.
4. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the cover.
3. Open the psu hinge.
4. Remove the memory module.
5. Remove the graphics card.
6. Remove the solid state drive.
7. Remove the WLAN module and SMA antenna.
8. Remove the heat sink assembly.
9. Remove the Voltage regulator heat sink.
10. Remove the processor.
About this task
The following images indicate the location of the system board and provides a visual representation of the removal procedure.
70
Disassembly and reassembly