Owners Manual
Table Of Contents
- Precision 3640 Tower Service Manual
- Contents
- Working on your computer
- Technology and components
- Major components of your system
- Disassembly and reassembly
- Recommended tools
- Screw list
- Cover
- PSU hinge
- Bezel
- Memory module
- Hard drive
- Optical drive
- Graphics card
- WLAN module and SMA antenna
- IO panel
- Power button module
- Speaker
- Intrusion switch
- Solid state drive
- Coin cell battery
- Power supply unit
- Front fan
- Top fan
- Heatsink assembly
- Voltage regulator heat sink
- Processor
- System board
- Troubleshooting
- Getting help and contacting Dell
- Optional IO card
- Cable cover
- Dust filter
- Chassis rubber feet
Steps
1.
NOTE:
A PCIe holder may not be required for computer that is shipped with NVIDIA Quadro P4000 or RTX4000 dual
graphics cards configuration.
Lift the side of the PCIe holder to release it from the graphics card and slide the holder out from the slot in the chassis.
2. Push the card retention latch away from the card and lift the graphics card out of the PCIe slot of the system board.
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the graphics card and provides a visual representation of the installation procedure.
38
Disassembly and reassembly