Owners Manual

Steps
1. Align the notch on the memory module with the tab on the memory module connector of the system board.
2. Press the memory module until the retention tabs clicks into place.
Next steps
1. Close the psu hinge.
2. Install the cover.
3. Follow the procedure in after working inside your computer.
Hard drive
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the cover.
3. Open the psu hinge.
About this task
The following images indicate the location of the 3.5-inch hard drive and provides a visual representation of the removal
procedure.
Disassembly and reassembly
29